Girard Systems GG750, Руководство по обслуживанию и ремонту

Страница: 44 / 49

C. INSTALLING THE NEW FABRIC
IMPORTANT: REPLACEMENT FABRICS ARE
ROLLED AND FOLDED FOR
SHIPMENT. THE SEAMS MUST FACE DOWNWARDS AS THE FABRIC IS
INSTALLED. THERE IS A SMALL WHITE POLY (POLYESTER) ROPE INSERTED
IN THE FABRIC THAT WILL SLIDE INTO THE
LEAD RAIL .
1.
2.
3.
manual.
The old fabric's trim insert will need to be removed from the roller tube, it is
held on by clear tape along the length of the tube and black duct tape on each
end. Take note of how the trim insert sits in the channel of the tube as the new
fabric trim insert will need to be inserted correctly and then taped in the same
fashion as the existing insert was attached.
With the new fabric attached to the tube, roll up the fabric as even and tight as you can in
the correct direction. (The fabric should roll from the bottom of the tube when the awning
is extending) Slide the tube with the motor and fabric assembly back into the case of the
awning as it came out. Confirm the non motor side of the roller tube is correctly in the
bushing that is mounted on the non motor side endplate.
Repeat steps 1-10 of motor installation section B.
Page 44 of 49