Page 10 of 14
PAIRING WITH ADDITIONAL DEVICES
As mentioned in the Product description the GC1146C can be paired with up to 20
compatible devices, wall switches handsets and others. The first device to be paired
with the 98GC74 Motor Controller shall now be referred to as the PRIMARY REMOTE
which is used to program all additional devices which shall be referred to as the
SECONDARY REMOTE or SECONDARY DEVICE. To add a secondary device to the motor
controller, carefully follow the steps below.
Note; when carrying out this part of the procedure each step must be
executed within 6 seconds of the previous one or the module will revert to
factory settings. It is highly recommended that you read and understand the
following sequence before attempting to execute it.
1)
First ensure that the Primary remote device is functioning correctly.
2)
Ensure that the Secondary device has the battery /batteries inserted correctly.
3)
Press the P2 Button on the Primary Remote TWICE (The Motor controller will
beep with each press)
4)
Press the P2 Button on the Secondary remote ONCE (The motor controller will
beep again)
5)
Press IN or OUT on the Secondary remote and ensure that the awning responds
accordingly.
REMOVING AN ADDITIONAL DEVICE
Select the Secondary device that is to be removed from the 98GC74’s list and follow the
steps below;
1)
Press the P2 Button on the device ONCE (The Motor controller will beep in
response.
2)
Press the STOP Button on the device ONCE.
3)
Press the P2 Button on the device again. The Motor controller will beep several
times indicating that the secondary device has been cancelled.
