Girard Systems 98GC274B, Инструкция по установке и эксплуатации

Страница: 3 / 21

3
CONTENTS
98GC274B Product description ……………………………………………………………………… 4
Specification ……………………………………………………………………………………………….. 5
Wiring Diagram …………………………………………………………………………………………… 7
Set up and Programming ..……………………………………………………………………………. 8
Change Motor Direction. ………… . ……………………………………………………………………. 8
Cancel a remote or all remote from GC274B……………………………………………………. 9
Multichannel Handset remote ………………………………………………………………………. 10
Programming the GC274B to a Remote handset 98GC2762B ………………… . …….….11
Multichannel Wall Switch 98GC2763B ………………………………………………………….... 15
Programming the GC274B to a Wall Switch 98GC2763B ………………….……………… 16
Programming to a Motion Sens or …………………………………………………………………. 18
THE G – LINK SYSTEM
The G-Link motors and control modules provided by Girard Systems communicate by
use of RF signals on a frequency of 433.92 MHZ. This eliminates the need for wiring
and the drilling of holes in the vehicle. These components must be electronically
matched, programmed or paired before use. This is usually done at the Girard Systems
factory. Should the need arise for the user to pair a device with the motor controller
they must refer to the appropriate manual for the devices applicable to their particular
installation.