Gira 5490 Series, Руководство по эксплуатации

Страница: 11 / 15

Hotel function On, Off
Basic setting: Off If the hotel function is
activated, the system will dim
to 20 % brightness when a
switch-off command is made.
Switch-off is only possible with
a forced position command.
Note: If the minimum
brightness is set to greater
than 20 %, then the system
dims to the set minimum
brightness when the hotel
function is activated.
Channel settings "switching"
Parameters Setting options, Basic
setting Explanations
Switch-on delay 0 s … 24 h
Basic setting: 0 s The load switches on after a
delay. Repeated switch-on
commands restart the delay
time. If the load has not yet
been switched on due to the
delay when a switch-off
command comes, then the
load will remain off.
Note: The set time apply to
operation using radio
transmitters. The device is
switched immediately when
the
Prog button is pressed.
Switch-off delay 0 s … 24 h
Basic setting: 0 s The load switches off after a
delay. Repeated switch-off
commands restart the delay
time. If the load has not yet
been switched off due to the
delay when a switch-on
command comes, then the
load will remain on.
Note: The set time apply to
operation using radio
transmitters. The device is
switched immediately when
the
Prog button is pressed.
Run-on time 0 s … 24 h
Basic setting: 0 s As soon as a run-on time has
been entered, the actuator will
no longer remain on
permanently, but only for the
length of the run-on time. The
run-on time is restarted if
actuation is repeated. This
parameter is directly
connected to the "Manual
switch-off of run-on time"
parameter.
Note: The set time apply to
operation using radio
transmitters. The device is
switched immediately when
the
Prog button is pressed.
32582722 10864994 27.04.2017
11/15
Wireless switching/dimming top unit, 1-gang