i
The detection area can be limited in order to minimize the influence of interference
sources. For this, use the push-on cover (see Limiting the detection area with the push-on
cover) or switch off individual sensors (see Limiting the detection area).
Aligning the device
The device has three independent PIR sensors for motion detection(Figure 5).
Figure 5: Detection field areas A, B and C, installation height 2.50 m
Figure 6: Arrangement of the areas A, B and C
o
Align the connection box (1) in such a way that the areas A, B and C match the structural
conditions. The arrangement is clearly evident under the decor ring (Figure 6).
82593212
12.01.2017
8/18
Presence detector and motion detector 360° compact
