ŭ
Pressing for longer than 10 seconds
Switch on/off switch-off warning
Prog Func
No function is saved for this device
Reset
Actuation of between 4 seconds and
10 seconds
Switching off the functions: Dynamic run-on
time, switch-off prewarning, on for 100 hours,
test operation
Reset
Pressing for longer than 10 seconds
Restoring to factory settings
Switching on a device function
The device can work either as a motion detector or presence detector.
o
Press the
ū
or
Ū
button.
The device works either as a motion detector or presence detector.
i
When changing the device function, the settings of the previous device function are saved
and reactivated on changing again.
Setting the sensitivity
The sensitivity can be set individually for each PIR sensor.
o
Press the
PIR A
,
PIR B
or
PIR C
for less than 10 seconds.
o
Within 5 seconds, press the
25 %
,
50 %
,
75 %
or
100 %
button.
Sensitivity is set.
Limiting the detection area
The detection area of the motion detector can be limited by switching off one or two PIR
sensors. Since the detection areas of the PIR sensors overlap, there is no distinct demarcation
of the blocked out detection area. If all the PIR sensors have been switched off, then the device
works as a twilight switch.
o
Press the
PIR A
,
PIR B
or
PIR C
button for longer than 10 seconds.
The appropriate PIR sensor is switched off and the detection area is limited.
i
By pressing the
PIR A-C
button all the PIR sensors are switched on again at 100 %
sensitivity. Individual PIR sensors can be switched off by setting a sensitivity for the PIR
sensor.
Setting the switch-on brightness
One of four predefined brightness thresholds (see table) or one individual brightness threshold
can be set (see Saving current brightness as the switch-on brightness). If the device is set as a
motion detector, then the brightness is measured on the device. If the device is set as a
presence detector, then the brightness is measured on the work surface.
o
Press the appropriate button (see table).
Brightness thresholds
Icon
Device function, motion
detector
Device function, presence
detector
Ê
5 lux
200 lux
Ŧ
10 lux
500 lux
ŧ
150 lux *
1000 lux
Ũ
Brightness-independent - day
operation
Brightness-independent - day
operation
* Setting for stairways according to DIN EN12464-1, 2003-03
82593212
12.01.2017
13/18
Presence detector and motion detector 360° compact
