Gira 1287 00, Руководство по эксплуатации

Страница: 30 / 40

30
Assigning call buttons for home station to a home station (internal call)
You can implement the so-called internal call function with the
optional call button for home stations. A voice connection
between two home stations can be established via the internal
call.
To assign the call button of a home station to another home
station (e.g. in the hobby room), proceed as follows:
1. Press the "Systemprog." button on the
control device
for
3 seconds to start programming mode (see Page 19).
2. Press the call button on
home station 1
for 3 seconds
until you hear a short acknowledgement tone.
✓ You will hear a long acknowledgement tone.
3. Press the button on
home station 2
for 3 seconds until
you hear a short acknowledgement tone.
✓ A long acknowledgement tone indicates successful
assignment.
Three short acknowledgement tones indicate faulty
assignment. The memory of the home station may already
be occupied. A maximum of 10 call buttons can be
assigned to a home station (a maximum of 15 call buttons
to a surface-mounted hand-free feature home station).
4. Press the "Systemprog." button on the
control device
to
exit the programming mode.
5. Carry out a function test.
i
Releasing the button after 3 seconds
If the button press is not ended after the first acknowledge-
ment tone, all assignments of the respective door/home sta-
tion will be deleted after an additional 3 seconds.