Gira 1287 00, Руководство по эксплуатации

Страница: 29 / 40

29
Assigning several home stations to a floor-call button
If several home stations are to be called simultaneously when
a floor call button is pressed, a floor call button can be
assigned to several home stations as follows:
1. Press the "Systemprog." button on the
control device
for
3 seconds to start programming mode (see Page 19).
2. Press the floor call button connected to
home station 1
for 6 seconds.
You will hear a brief acknowledgement tone after 3
seconds. Hold down the button for another 3 seconds
until you hear a long acknowledgement tone.
3. Press the button on
home station 2
for 3 seconds until
you hear a short acknowledgement tone.
✓ A successful teach-in is confirmed by a long
acknowledgement tone at home station 2.
To assign an additional home station, repeat the procedure
from Step 2.
4. Briefly press the "Systemprog." button on the
control
device
to exit the programming mode.
5. Carry out a function test. All assigned home stations ring
when the floor-call button is pressed.
Do not connect floor-call button in parallel
A floor-call button may not be connected to several home
stations in parallel.