Gira 1287 00, Руководство по эксплуатации

Страница: 21 / 40

21
House divided into several flats:
Assigning door station call buttons to home stations
To assign the door-station call buttons to the respective home
stations, please proceed as follows:
1. Press the "Systemprog." button on the
control device
for
3 seconds to start programming mode (see Page 19).
2. Press the call buttons on the
door station
for 3 seconds
until you hear a short acknowledgement tone.
Important:
Press the call buttons in the sequence in which
the home stations will be assigned later.
✓ You will hear a long acknowledgement tone.
3. Go to the
home station
whose call button is the
first
one
you pressed at the door station.
Press the
button on this
home station
for 3 seconds
until you hear a short acknowledgement tone.
✓ A long acknowledgement tone indicates successful
assignment.
Three short acknowledgement tones indicate faulty
assignment. The memory of the home station may already
be occupied. A maximum of 10 call buttons can be
assigned to a home station (a maximum of 15 call buttons
to a surface-mounted hand-free feature home station).
i
Releasing the button after 3 seconds
If the button press is not ended after the first acknowledge-
ment tone, all assignments of the respective door/home
station will be deleted after an additional 3 seconds.