Gira 1287 00, Руководство по эксплуатации

Страница: 19 / 40

19
Switching system to programming mode
The Gira door communication system is switched to program-
ming mode for start-up:
1. Press the "Systemprog." button on the
control device
for
3 seconds.
✓ The yellow LED next to the programming button flashes
(flash frequency: 1 Hz) after the button is pressed and
indicates the active programming mode.
The system is now in programming mode for approx.
7 minutes. Each time the start-up button is pressed on a door
or home station, the time is reset to approx. 7 minutes.
Exiting programming mode
1. Briefly press the "Systemprog." button on the
control
device
to exit the programming mode.
✓ The yellow LED goes out.
Start-up documentation
For documentation on the home stations assigned to the call
buttons, please see the table on Page 36.
There you enter the names/homes in the sequence in which
you will allocate the home stations later on.
i
LED indicators on BUS devices
The active programming mode is also signalled by the LED of
various BUS devices, such as the hands-free feature home
station, the Comfort home station with receiver or the sur-
face-mounted hands-free feature home station.
An overview of the LED indication is found on Page 34.