Page 35
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
To set the time duration, choose whether to set the cooking by the time or with core probe or Delta T by touching the symbol (the example
shows the end of cooking with core probe).
A. Select Core probe
B. Touch the value field to set the cooking minutes or the temperature to be reached by the core probe
C. Turn the navigation dial to adjust the temperature value
D. Press the navigation dial to save the set value
To set the time duration, choose whether to set the cooking by the time or with core probe or Delta T by touching the symbol (the example
shows the end of cooking with core probe).
A. Select “Time”
B. Touch the value field to set the cooking minutes or the temperature to be reached by the core probe
C. Turn the navigation dial to adjust the temperature value
D. Press the navigation dial to save the set value
4.3.5 Time Setting:
4.3.6 Core Probe:
Note:
To make the oven works continuously, Touch the time field and turn the navigation dial to the left until the display shows INF.
If the Delta T function is required, set the temperature of both the core probe and Delta T.
• Time setting:
The cooking cycle stops automatically when the set time expires, range: 1 - 599 minutes (10 hours)
• Core probe:
the cooking cycle stops automatically when the temperature measured by the probe inside the food reaches the set value
A
A
B
B
PUSH
PUSH
SET
SET
C
C
D
D
Note:
When not in use, place the probe back into the magnetic support on the left side of the oven.
At the end of the cooking cycle, take care to remove the probe from the core before taking the tray out of the oven. The core probe is very
sharp and it reaches high temperatures after cooking, do not pull the probe by the connection wire to remove it.
Do not insert the hot probe in frozen food to prevent thermal shock to the probe, which can cause the probe to become damaged.
4.0 Operation
