4. Installation
4.1 Select a Location for the Inverter
3.3 Keypad
3.4 LCD
There are four keys in the front panel of the Inverter(from left to right):
ESC, UP, DOWN and ENTER keys. The keypad is used for:
Scrolling through the displayed options (the UP and DOWN keys);
Access to modify the adjustable settings (the ESC and ENTER keys).
3. Overview
The two-line Liquid Crystal Display (LCD) is located at the front panel of the Inverter,
which shows the following information:
Inverter operation status and data;
Service messages for operator;
Alarm messages and fault indications.
.8.
.9.
To select a location for the inverter, the following criteria should be considered:
To
avoid
over
heating
ambient air temperature MUST be considered when choosing
the inverter installation location. Ginlong recommend using a sun shade minimizing
direct sunlight when the ambient air temperature around the unit exceeds 40°C.
Do not install in small closed spaces where air cannot circulate freely. To avoid
overheating, always make sure the flow of air around the inverter is not blocked.
Exposure to direct sunlight will increase the operational temperature of the inverter and
may cause output power limiting. Ginlong recommend inverter installed to avoid direct
sunlight or raining.
Figure 4.1 Recommend Installation place
