GILBARCO VEEDER-ROOT FlexPay IV, Инструкции по обновлению

Страница: 5 / 26

1
SECTION 1 - INTRODUCTION
1
MDE-5491A
Purpose
This manual provides instructions for upgrade of a dispenser door from a numeric keypad to a secure
alphanumeric keypad for a FlexPay™ IV CRIND®.
Intended Users
This manual is intended for Gilbarco®-trained and certified Authorized Service Contractors (ASCs).
Required Tools
• Phillips® Screwdriver
• Metric Socket Set
• Standard Socket Set
Configured Kits - Parts List
The following parts are included in a common E-CIM
™
Kit:
Location Description Part # Quantity Notes
5.7” E-CIM Bezel M15718A8xXXXX 1 5.7” with Printer
5.7” E-CIM Insert M15717A913XXX 1 5.7” without Printer
10.4” E-CIM Bezel M15720A8xXXXX 1 10.4” with Printer
10.4” E-CIM Insert M15719A913XXX 1 10.4” without Printer
Pre-mounted to E-CIM Card Reader M14330A001 1
Universal Payment Module
(UPM) M15550AXXX 1 Secure Alphanumeric Keypad
UPM Bracket M16007A001 1 UPM Bracket
UPM Gasket M16040B001 1 UPM Gasket
Soft Keys, 5.7” M01254B003 1 For 5.7” Display
Soft Keys 10.4” M10206B001/B002 1 each B001=Right, B002=Left
Americans with Disabilities
Act (ADA) Membrane M12287B001 1 ADA Membrane
Pre-mounted to Bezel
(printer option only) Printer*** M04119A001 1 -
Printer Shield*** M15734B001 1 Printer Shield
Cable Universal Serial Bus
(USB)*** M03695B012 1 USB Cable for Printer
24V Cable*** M04405A010 1 Printer Power Cable
Ground Cable*** M04431A007 1 Printer Ground Cable
Optional UPM Heater**
M07953A013 1 One-sided heater (optional)
M07953A008 1 Double-sided heater (optional)
Graphics for Bezel
Note: Configured based on template.
** Items apply to optional UPM Heater
*** Items only apply to the optional printer