GILBARCO VEEDER-ROOT FlexPay IV, Инструкции по обновлению

Страница: 23 / 26

19
SECTION 4 - INSTALLATION
4
MDE-5491A
2
Connect the M13119A003 Cable to the left, right, and ADA softkey, PIP3, and then (after installing the
E-CIM) to the door node, and J192 for the door switch.
Note: The M13119A003 Cable for the new E-CIM is the 10.4-inch display version and it will be included

in the kit. The M13119A002 cable designed for the 5.7-inch E-CIM will not be transferred over

to the new configuration.
Figure 3: Connecting M13119A003 Peripherals Cable
P905
J905
J902A
P902A
3
Connect M14346 Video Cable from UPM to display assembly.
4
Connect M14340A002 Power Cable to UPM, card reader, and PIP3.
5
Connect USB cable from UPM to PIP3.
6
Mount the ADA cable bracket to the door and tie-wrap the cable to the bracket.
7
If present, in the original door, connect the cables from the VeriFone UX400 Contactless Card Reader
[M14331A001 (to card reader)], or 2D Scanner [M14055B001 (to PIP3)] onto the 10.4-inch E-CIM door.
8
If present connect the M14338 Applause Media System Video and M14425 Applause Media System
Audio Cables to the UPM and PIP3.
9
Connect the M14339A001 Cable to the PIP3.
10
Connect the ground cables from the UPM and card reader (must be routed away from power/data
cables).