GILBARCO VEEDER-ROOT FlexPay IV, Инструкции по обновлению

Страница: 18 / 26

MDE-5491A
14
SECTION 3 - REMOVING COMPONENTS
3
Security Shield for Ultra-Hi Units
The Security Shield is the Ultra-Hi security shield upgrade for FlexPay IV. It is applicable for
dispensers with a printer and with security shields.
To remove the Security Shield, proceed as follows:
1
Remove the center security shield and discard.
2
Remove the padlocks.
Figure 8: Removing Padlocks and Center Security Shield
Remove
Padlocks
Removing Two
Bolts and Nuts
3
Remove the left side shield mounting hardware and save for reuse.