background image

3

GP25 Winches are designed to be operated using synthetic winch ropes (we do not 
recommend the use of steel cables with this winch).
The GP25 winch is designed to be used in the upright position and the rope should be 
installed from under the drum. This is called “Under wound”.
If the winch is mounted back to front (in a reverse position) the rope will be installed over the 
top of the drum to allow the drum to rotate in the correct direction so the brake still works. 
This is called “Over wound”.

Note - From the top = over wound. From the bottom = under wound. 
Caution - the use of steel rope is not recommended.

Fitting a Rope to a GP25

The GP25 winch drum is nylon coated for durability and has a welded loop on one side. 
- If the winch is fitted in an upright position, pass the synthetic rope through the Fairlead and   

under the drum.

- Bring the rope around the back of the drum and over the top. Then pass the end of the rope

through the retaining loop.

- Tie a simple stop knot and pull tight.
- Your rope is now secure and ready to spool the rope on to the winch drum.
- When retrieving the rope in a no load situation it is often advisable to pulse the winch so

the motors do not over rev. 

- Be sure the rope is distributed evenly and tightly on the drum.

Warning - Over revving when retrieving rope in a no load scenario can cause premature 
motor failure.
Caution - GP25 winches are very fast, be sure to be standing at least two metres from the 
winch, always wear gloves and make sure there are no loops in the rope or debris that could 
catch your hands
.

Rope Care and Use

Synthetic ropes are waterproof, float and are easier to handle than steel cable, however 
debris can become caught in the strands, so gloves must be worn AT ALL TIMES.
Synthetic ropes do need to be cared for - follow these simple rules to increase rope longevity 
and safety
- Never use on rocks without protection.
- Avoid constant High UV exposure.
- Keep ropes clean and dry.
- Check ropes for damage before and after use.
- If the rope is damaged, pinched, frayed or defective in any way, this will reduce the load-

carrying capability and should be replaced or repaired immediately.

- ALWAYS wear protective gloves when handling any winch rope.

a. Rope

Over wound

Under wound

Содержание GP25































Отзывы: