76
Connecting the base to the PABX
SX790/795 ISDN / IM-Nord EN / A31008-N415-R201-1-SM19 / pabx.fm / 18.08.2010
V
e
rsion 4.1, 21
.11.2007
Dialling options
The KEYPAD function allows you to control
certain features by entering sequences of
characters and digits.
The KEYPAD function must be activated
when you connect your Gigaset to an ISDN
PABX or exchange (e.g., Centrex) that is con-
trolled using KEYPAD protocol. The digits/
characters 0–9, * and # are sent as keypad
information elements. Please ask your serv-
ice provider about the information and
codes you can transmit.
Setting options
You can switch between the settings
Auto.
Tone Dial
,
Auto. Keypad
and
Dial of * and #
.
Auto. Tone Dial
Once normal dialling has been activated,
* and # are not transmitted during dial-
ling and if * and # are entered it is not pos-
sible to switch to the keypad.
Auto. Keypad
Once * or # have been entered, this set-
ting automatically switches signalling
during dialling to the keypad. This auto-
matic switchover is needed for giving
commands to the exchange or PABX.
Dial of * and #
Once Dial of * and # has been activated,
the * and # characters are transmitted
during dialling as commands to the
exchange or PABX.
Regardless of the setting options above,
after dialling or during a call, the phone
automatically switches to tone dialling
(DTMF) e.g., for controlling an answering
machine remotely.
v
¤
Ï
¤
Telephony
¤
Dialling Mode
q
Select setting and press
§Select§
,
e.g.,
Auto. Tone Dial
(
Ø
= on).
Activating/deactivating
the keypad during a call
In addition to the permanent settings
described above, you can also switch tem-
porarily to the keypad.
The setting only applies to the current exter-
nal call and is automatically deactivated
after the call is ended.
Depending on whether
Auto. Keypad
is acti-
vated, you may need to activate or deacti-
vate
Keypad
during the call.
§Options§
Open menu.
Keypad
Select and press
§Change§
(
³
= on).
•