background image

23

Using the phone

SX790/795 ISDN / IM-Nord  EN / A31008-N415-R201-1-SM19 / starting.fm / 18.08.2010

V

e

rsion 4.1, 21

.11.2007

Using the phone

Using the control key

Below, the side of the control key that you must press in the 
respective operating situation is marked in black (top, bottom, 
right, left, centre) e.g., 

v

 for "press right on the control key" 

or

w

 for "press the centre of the control key". 

The control key has a number of different functions:

When the handset is in idle status

s

 Open 

the 

directory.

v

 

Open the main menu.

u

 

Open the list of handsets.

In the main menu

t

s

v

 or 

u

Navigate to the required function.

In submenus and lists

t

s

Scroll up/down line by line.

In input fields

Use the control key to move the cursor up 

t

, down 

s

, right 

v

 or left 

u

Press and 

hold

 

v

 or 

u

 to move the cursor 

word by word

.

During an external call

s

 Open 

the 

directory.

u

 

Initiate an internal consultation call.

t

Adjust the loudspeaker volume for earpiece and handsfree mode.

Functions when pressing the middle of the control key

Depending on the operating situation, the key has different functions.

u

In idle status,

 the key opens the main menu.

u

In submenus, selection and input fields

, the key takes on the function of the 

display keys 

§OK§

§Yes§

§Save§

§Select§

 or 

§Change§

.

Please note

These instructions demonstrate the main menu being opened by pressing the 
right of the control key and functions being actuated by pressing the appropri-
ate display key. However, if you prefer, you can use the control key as described 
above.

Содержание Gigaset SX790 ISDN






























































































Отзывы: