59
Setting the alarm clock
SX790/795 ISDN / IM-Nord EN / A31008-N415-R201-1-SM19 / registr_sett.fm / 18.08.2010
V
e
rsion 4.1, 21
.11.2007
Setting the alarm clock
Prerequisite:
The date and time have
already been set (
Activating/deactivating the alarm
clock and setting the wake-up time
v
¤
á
¤
Alarm Clock
¤
You can enter data in the following fields:
Activation:
Select
On
or
Off
.
Time:
Enter the wake-up time in 4-digit format.
How often:
Select
Daily
or
Monday-Friday
.
Volume:
Set the volume (1–6).
Melody:
Select melody.
§Save§
Press the display key.
In idle status, the
¼
icon and wake-up time
are displayed.
A wake-up call is signalled on the display
(
page 3) and with the selected ringtone.
The wake-up call sounds for 60 seconds. If
no key is pressed, the wake-up call is
repeated twice at five-minute intervals and
then switched off.
While the wake-up call sounds,
you can
permanently change the volume by press-
ing the side keys
ø
(louder) or
÷
(quieter).
During a call, the wake-up call is only sig-
nalled by a short tone.
Deactivating the wake-up call/
repeating after a pause
(snooze mode)
Prerequisite
: A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
Or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repeti-
tion, the wake-up call is deacti-
vated completely.
Using multiple handsets
Registering handsets
You can register up to six handsets to your
base.
A Gigaset S79H handset can be registered
on up to four bases.
Please note:
After successful registration the
f
mes-
sage key will flash. Press this button
(
page 18) to start the connection assist-
ant and assign the MSN to the handset
(default setting: all MSNs are used as receive
MSNs and the first MSN is used as a send
MSN for this handset).
You can change this assignment later
(
Manual registration of
Gigaset S79H to Gigaset SX790
ISDN
You must manually register the handset on
both the handset (1) and the base (2).
Once registration is complete, the handset
returns to idle status. The handset's internal
number is shown in the display, e.g.,
INT 1
. If
not, repeat the procedure.