18
Setting up the telephone – installation wizard
SX790/795 ISDN / IM-Nord EN / A31008-N415-R201-1-SM19 / starting.fm / 18.08.2010
V
e
rsion 4.1, 21
.11.2007
Connection assistant
The connection assistant will
start automatically
as soon as the ISDN wizard is
complete. You can use the connection assistant to assign the previously configured
numbers to internal parties as send and receive connections, if necessary.
u
Receive connections
are numbers (MSNs) on which you can be called. You can
assign the MSNs for internal parties as the receive connection. Incoming calls are
only forwarded to the internal parties to which the relevant receive connection
has been assigned.
u
Send connections
are the numbers (MSNs) that are sent to the called party. The
network provider calculates charges based on the send connections. You can
assign a fixed MSN as a send connection to each internal party.
u
Every MSN can be both a send and receive connection. You can assign each MSN
to multiple handsets.
After registration/getting started, the handsets are assigned all MSNs as receive
connections. The base number (usually MSN1) is assigned to the devices as a send
connection.
¤
Press the
§Yes§
display key if you
wish to display or amend the send
and receive connection settings for
internal parties (here INT 1).
¤
Press the
§No§
display key if you wish
to switch to the next internal party.
The list of receive connections cur-
rently assigned is displayed.
Press the bottom of the control key
s
to scroll through the complete list if
necessary.
¤
Press the display key
§Change§
, if you
wish to change the setting for the
receive connections.
¤
Press the display key
§OK§
, if you do
not wish to change the setting.
Connection Assist.
?
Assign connections
to handset
INT 1?
No
Yes
Receive Connections
i
INT 1
receives calls for
MSN 1:
12345601
MSN 2:
12345602
MSN 3:
12345603
Change
OK
