Operation with several base stations
63
Gigaset 2015, GBR: A30852-X-1105-B301-1-7619
kap13.fm4
4.8.99
Typical configurations
Example 1: Two base stations connected to one telephone circuit via a
telephone changeover switch
The following example shows a configuration in which
two base stations are connected to one telephone circuit
by way of a telephone changeover switch. Each of the six
mobile units is logged on at both base stations.
Each mobile unit can be used to make calls in the radio
range of both base stations. Each can also be accessed
for incoming calls, irrespective of the radio range to which
it belongs.
With this configuration you can operate up to 6 mobile
units per base station.
MU2
MU3
MU1
BS1
MU6
MU5
MU4
BS2
Changeover
L
switch
L = Telephone circuit
BS = Base station
MU = Mobile unit
