Important information on setup and operation
5
Gigaset 2015, GBR: A30852-X-1105-B301-1-7619
kap03.fm4
4.8.99
●
When replacing the batteries, it is very important that
you use only approved batteries of the following
types:
NiCd batteries
Saft RC6, Panasonic P-60 AA/1P, Philips R6 NC-P, UCAR
RC6, Energizer Eveready RC 6, Daimon ACCU 1000,
Varta Accu Plus Ni-Cd 1,2V No. 5006, Sanyo N-3UC
NiMH batteries
Sanyo HF-3 U (1300 mAh), GP GP120 AA HC, Emmerich
CE R 6, Energizer EMH-1100 AAC, Varta VH 1101 AA
Attaching carrying clip to mobile unit
If desired, you can attach the carrying clip supplied with
the unit, e.g. to carry the mobile unit in the pocket of your
jacket.
Hold the mobile unit with the keypad facing the palm of
your hand. You will see two small holes on the sides, level
with the display. Place the clip in one hole and then push
it into the opposite hole until it clicks into place.
Operation with telephone changeover switch
You can operate the Gigaset 2015 “behind” a telephone
changeover switch, e.g. an automatic changeover switch.
Since, however, the Gigaset 2015 has neither a grounding
wire nor a W-wire, telephone changeover switches with
loop current supervision are required. These can be ob-
tained from retail outlets.
Never use ordinary batteries.
Only use approved batteries.
