Important basic settings
12
Gigaset 2015, GBR: A30852-X-1105-B301-1-7619
KAP04.FM4
4.8.99
Checking the signalling method of your telephone line
You can check which method of signalling has been set
on your telephone.
Setting the signalling method
Operation in conjunction with a PBX
If you operate your Gigaset 2015 in connection with a
PBX (telecommunications system), you can set the fol-
lowing for switching to the public telephone network:
●
the trunk code
●
the length of the pause following the trunk code
If the PBX is a satellite to a main PBX, you can set the
following:
●
the trunk code
●
the main trunk code
●
the length of the pause following the trunk code/main
trunk code
c
Dial a number. If your Gigaset 1015 is linked to a PBX
(telecommunications system), you may have to press a
further key or keys to obtain an outside line.
You hear dial tone.
o
Press any digit, e.g. 2. If the same dial tone is audible as
previously, you will have to change the signalling method.
B
#1
Start the procedure.
o
Enter the 4-digit system code; default 0000
(
➔
page 14).
O
033
B
Set dial pulsing (DP).
or
O
038
B
Set dual-tone multifrequency signalling (DTMF)
(PBX recall button flash, short/80 ms).
For details of the trunk code/main trunk code
and the length of pause please refer to the PBX
documentation.
