Gigabyte W511 Series, Руководство пользователя, Страница: 46 / 72

En
gl
ish
37
Personalize Your W511 Series Notebook Computer
word with up to 8 alpha-numeric characters, and then re-enter it for
confirmation.
• Set User Password
This field is only available when Supervisor Password has set. Enter
the user password when boot the system or resume from suspend
mode. But if the Write Protect is set in the Fixed disk boot sector field,
you should enter a supervisor password to access the fixed disk when
boot the system or resume from suspend mode.
• Set HDD Password
HDD password gives you the authority in accessing to hard disk.
When you press <Enter> in this field, the Set Supervisor Password
dialog box appears. Enter a new password with up to 8 alpha-numeric
characters, and then re-enter it for confirmation.
• Password on Boot
If you set this field to Enabled, your notebook computer will always ask
for the password every time you boot your notebook computer.
This item allows you to set the search drive sequence where the
system will try to boot up first.
To select the boot device, you can use the up or down arrow key,
then press <+> to move up the device in the list or press <-> to move
down the device in the list. To exit from this menu, press <Esc>.
Using the Boot Setup
Phoenix BIOS Setup Utility
Info Main Security Boot Exit
Item Specific Help
Floppy Devices
+Hard Drive
CD-ROM Drive
Network Boot
Use <

>or <

>to
select a device, then
press <+>to move it
up to the list, or <->
to move it down to
the list. Press <ESC>
to exit from this
menu.
F1 Help
  Select Item -/+ Change Values F9
Setup Defaults
ESC Exit

–

Select Menu Enter Select F10

Sub-menu
Save and Ext