manualshive.com logo in svg

Gigabyte G492-Z52, Руководство пользователя, Страница: 103 / 137

Поделиться
Скачать
Gigabyte G492-Z52 Скачать руководство пользователя страница 103

- 103 -

BIOS Setup

5-3-3-4 Memory MBIST

(Note)  This item appears when 

MBIST Enable 

is set to 

Enabled

.

Parameter

Description

Memory MBIST

MBIST Enable

Enable/Disable the Memory MBIST function.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

MBIST Test Mode

(Note)

Selects MBIST Test Mode. 

Interface Mode

: Tests Single and Multiple CS transactions and Basic 

Connectivity. 

Data Eye Mode

: Measures Voltage vs. Timing.

Options available: Auto, Both, Interface Mode, Data Eye Mode. Default 
setting is 

Auto

.

MBIST Aggressors

(Note)

Enable/Disable MBIST Aggressor test.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

MBIST Per Bit Slave Die 
Reporting

(Note)

Enable/Disable to report 2D data eye results in ABL log for each DQ, 
Chipselect, and Channel.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Data Eye

Press [Enter] to configure advanced items.

Memory Healing BIST

Enable/Disable memory healing BIST.
Options available: Disabled, BIOS Mem BIST, Self-Healing Mem BIST, BIOS 
and Self-Healing Mem BIST. Default setting is 

Disabled

.

Содержание G492-Z52










































































































































Отзывы:

Нет отзывов