manualshive.com logo in svg

Gigabyte G492-H80, Руководство пользователя

Поделиться
Скачать
Gigabyte G492-H80 Скачать руководство пользователя страница 87

- 85 -

BIOS Setup

5-3-11  Power Policy

Parameter

Description

Power Policy Quick Settings

Selects a Power Policy Quick Setting.

Options available: Standard, Best Performance, Energy Efficient, Turbo 

Lock. Default setting is 

Standard

.

SpeedStep (Pstates)

Conventional Intel SpeedStep Technology switches both voltage and 
frequency in tandem between high and low levels in response to processor 
load.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Turbo Mode

When this item is enabled, the processor will automatically ramp up the 
clock speed of 1-2 of its processing cores to improve its performance. 
When this item is disabled, the processor will not overclock any of its core.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

CPU C6 report

Enable/Disable the BIOS to enable the report from the CPU C6 state (ACPI 
C3) to the OS.
Options available: Disabled, Enabled, Auto. Default setting is 

Disabled

.

Enhanced Halt State (C1E)

Enable/Disable the C1E support for lower power consumption. Takes effect 
after reboot.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

Package C State

Configures the C-State package limit.

Options available: C0/C1 state, C2 state, C6(non Retention) state, 
C6(Retention) state, Auto. Default setting is 

Auto

.

Содержание G492-H80









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды