Gigabyte G492-H80 Скачать руководство пользователя страница 75

Страница: 75 / 104

- 73 -

BIOS Setup

Parameter

Description

Restore NVDIMMs

Enable/Disable Automatic restoring of NVDIMMs.
Options available: Enable, Disable. Default setting is

Enable

Interleave NVDIMMs

Controls if NVDIMMs are interleaved together or not.
Options available: Enable, Disable. Default setting is

Enable

Assert ADR on Reset

Enable/Disable Assert ADR on Reset.
Options available: Enabled, Disabled. Default setting is

Disabled

Assert ADR on S5

Enable/Disable Assert ADR on S5.
Options available: Enabled, Disabled. Default setting is

Disabled

Get Memory Timing

Auto is the detected SPD value and use it, otherwise use BIOS Build-in.
Options available: Auto, BIOS Build-in. Default setting is

BIOS Build-in

Memory Topology

Press [Enter] to view memory topology with DIMM population
information.

Memory RAS Configuration

Press [Enter] to configure advanced items.

RAS Type

– Displays the RAS type.

New SDDC Mode

– Enable/Disable 48B SDDC ECC from ICX C0 Onwards.

– Options available: Disabled, Enabled. Default setting is

Enabled

Mirror Mode

– Mirror Mode will set entire 1LM memory in system to be

mirrored, consequently reducing the memory capacity by half.
Enables the Mirror Mode will disable the XPT Prefetch.

– Options available: Disabled, Full Mirror Mode, Partial Mirror

Mode. Default setting is

Disabled

Correctable Error Threshold

– Correctable Error Threshold (0x01-0x7fff) used for sparing, and

leaky bucket.

– Press the <+> / <-> keys to increase or decrease the desired

values.

Trigger SW Error Threshold

– Enable/Disable Sparing trigger SW Error Match Threshold.

– Options available: Disabled, Enabled. Default setting is

Disabled

Sparing SW Error Match Threshold

– Correctable Error Threshold (1-32767) used for bank level

information.

– Press the <+> / <-> keys to increase or decrease the desired

values.

Correctable Error Time Window

– Correctable Error time window based interface in hour (0-24).

– Press the <+> / <-> keys to increase or decrease the desired

values.

Содержание G492-H80









































































































Результаты поиска

Содержание G492-H80

Отзывы:

Бренды по названию

Популярные бренды

Gigabyte G492-H80, Руководство пользователя

Результаты поиска

Содержание G492-H80

Отзывы:

Бренды по названию

Популярные бренды