manualshive.com logo in svg

Gigabyte G492-H80, Руководство пользователя

Поделиться
Скачать
Gigabyte G492-H80 Скачать руководство пользователя страница 102

BIOS Setup

- 100 -

5-7  Save & Exit Menu

The Save & Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit 
options then press <Enter>

.

 

Parameter

Description

Save Options

Save Changes and Exit

Saves changes made and closes the BIOS setup. 
Options available: Yes, No.

Discard Changes and Exit

Discards changes made and exits the BIOS setup.
Options available: Yes, No.

Save Changes and Reset

Restarts the system after saving the changes made. 
Options available: Yes, No.  

Discard Changes and Reset

Restarts the system without saving any changes.
Options available: Yes, No.

Save Changes

Saves changes done so far to any of the setup options.
Options available: Yes, No.

Discard Changes

Discards changes made and closes the BIOS setup.
Options available: Yes, No.

Default Options

Содержание G492-H80









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды