manualshive.com logo in svg

Gigabyte G291-2G0, Руководство по обслуживанию, Страница: 36 / 139

Поделиться
Скачать
Gigabyte G291-2G0 Скачать руководство пользователя страница 36

System Hardware Installation

- 36 -

3-6  Installing a PCI Express Card

•  Voltages can be present within the server whenever an AC power source is connected. This 

voltage is present even when the main power switch is in the off position. Ensure that the system 
is powered-down and all power sources have been disconnected from the server prior to installing 
a PCI card.

Failure to observe these warnings could result in personal injury or damage to equipment.

Follow these instructions to install a PCI Express x8 card on right side of the 

system:

1.  Loosen and remove the two screws securing the PCI Express card bracket on the right side of the 

system.

2.  Remove the PCI Express card bracket from the system.
3.  Install the PCI Express card into the bracket.
4.  Secure the PCI Express card to the bracket with one screw.
5.  Install the PCI Express card bracket with card back into the system, ensure that the connector on 

the bracket is securely installed into the connector on the motherboard as shown.

6.  Secure the PCI Express card bracket with card to the system with two (2) screws.

2

1

1

Содержание G291-2G0












































































































































Отзывы:

Нет отзывов