Gigabyte G291-2G0 Скачать руководство пользователя страница 124

Страница: 124 / 139

BIOS Setup

- 124 -

Provision Factory Defaults

Allows to provision factory default Secure Boot keys when system is in Setup Mode.

Options available: Enabled/Disabled. Default setting is

Disabled

Install Factory Default Keys

Installs all factory default keys. It will force the system in User Mode.

Options available: Yes/No.

Enroll Efi Image

Press [Enter] to enroll SHA256 hash of the binary into Authorized Signature Database (db).

Save all Secure Boot variables

Press [Enter] to save all Secure Boot Keys and Key variables.

Secure Boot variable

Displays the current status of the variables used for secure boot.

Platform Key (PK)

Displays the current status of the Platform Key (PK).

Press [Enter] to configure a new PK.

Options available: Set New.

Key Exchange Keys (KEK)

Displays the current status of the Key Exchange Key Database (KEK).

Press [Enter] to configure a new KEK or load additional KEK from storage devices.

Options available: Set New/Append.

Authorized Signatures (DB)

Displays the current status of the Authorized Signature Database.

Press [Enter] to configure a new DB or load additional DB from storage devices.

Options available: Set New/Append.

5-5-1-1 Key Management

Содержание G291-2G0












































































































































Результаты поиска

Содержание G291-2G0

Отзывы:

Gigabyte G291-2G0, Руководство по обслуживанию, Страница: 124 / 139

Результаты поиска

Содержание G291-2G0

Отзывы: