Gigabyte G291-2G0 Скачать руководство пользователя страница 120

Страница: 120 / 139

BIOS Setup

- 120 -

5-4-3

BMC Network Configuration

Select NCSI and Dedicated LAN

Switch NCSI and dedicated LAN and send KCS command.

Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3 (Failover).

Default setting is

Mode1 (Dedicated)

Lan Channel 1

Configuration Address source

Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option will not

modify any BMC network parameters during BIOS phase.

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting is

DynamicBmcDhcp

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.

Please note that the IP address must be in three digitals, for example, 192.168.000.001.

Router IP address

Displays the Router IP Address information.

Station MAC address

Displays the MAC Address information.

Real-time synchronize BMC network parameter values

Press [Enter] to synchronize the BMC network parameter values.

Содержание G291-2G0












































































































































Результаты поиска

Содержание G291-2G0

Отзывы:

Gigabyte G291-2G0, Руководство по обслуживанию, Страница: 120 / 139

Результаты поиска

Содержание G291-2G0

Отзывы: