manualshive.com logo in svg

Gigabyte G291-2G0, Руководство по обслуживанию, Страница: 107 / 139

Поделиться
Скачать
Gigabyte G291-2G0 Скачать руководство пользователя страница 107

- 107 -

BIOS Setup

(Note 1)  Only appears when HDD sets to 

RAID

 Mode.

(Note 2)  Only Supported when HDD is in 

AHCI

 or 

RAID

 Mode.

 

RAID Mode: When set to RAID, the SATA controller enables both its RAID and AHCI functions. You will 
be allows access the RAID setup utility at boot time.  

 

Options available: AHCI/RAID. Default setting is 

AHCI

.

  Alternate Device ID on RAID

(Note 1)

 

 

Enable/Disable Alternate Device ID on RAID mode.

 

Options available: Enable/Disable. Default setting is 

Disabled

 

Please note that this option appears when HDD is in RAID Mode.

  SATA Port 0/1/2/3/4/5/6/7

 

The category identifies SATA hard drives that are installed in the computer. 

 

System will automatically detect HDD type. 

  Port 0/1/2/3/4/5/6/7

 

Enable/Disable Port 0/1/2/3/4/5/6/7 device.

 

Options available: Enable/Disable. Default setting is 

Enable

.

  Hot Plug (for Port 0/1/2/3/4/5/6/7)

(Note2)

 

Enable/Disable HDD Hot-Plug function.

 

Options available: Enable/Disable. Default setting is 

Disable

.

  Spin Up Device (for Port 0/1/2/3/4/5/6/7)

(Note2)

 

On an edge detect from 0 to 1, the PCH starts a COM reset initialization to the device.

 

Options available: Enable/Disable. Default setting is 

Disable

.

Содержание G291-2G0












































































































































Отзывы:

Нет отзывов