manualshive.com logo in svg

Gigabyte G291-2G0, Руководство по обслуживанию, Страница: 126 / 139

Поделиться
Скачать
Gigabyte G291-2G0 Скачать руководство пользователя страница 126

BIOS Setup

- 126 -

5-6  Boot Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error 

message if the legacy drive(s) specified is not bootable. 

  Boot Configuration

  Setup Prompt Timeout

 

Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting.

 

Press the numeric keys to input the desired values.

  Bootup NumLock State

 

Enable/Disable the Bootup NumLock function.

 

Options available: On/Off. Default setting is 

On

.

  Quiet Boot   

 

Enable/Disable showing the logo during POST.

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  Boot mode select   

 

Selects the boot mode.

 

Options available: LEGACY/UEFI. Default setting is 

UEFI

.

  FIXED BOOT ORDER Priorities
  Boot Option #1/#2/#3/#4/#5

 

Press [Enter] to configure the boot priority. 

        By default, the server searches for boot devices in the following secquence: 

 

1.  Hard drive.
2.  CD-COM/DVD drive.
3.  USB device.
4.  Network.
5.  UEFI.

Содержание G291-2G0












































































































































Отзывы:

Нет отзывов