manualshive.com logo in svg

Gigabyte G291-2G0, Руководство по обслуживанию, Страница: 130 / 139

Поделиться
Скачать
Gigabyte G291-2G0 Скачать руководство пользователя страница 130

BIOS Setup

- 130 -

5-7  Save & Exit Menu

The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then 
press 

Enter

. 

  Save Options
  Save Changes and Exit   

 

Saves changes made and closes the BIOS setup. 

 

Options available: Yes/No.   

  Discard Changes and Exit   

 

Discards changes made and exits the BIOS setup.

 

Options available: Yes/No.   

  Save Changes and Reset   

 

Restarts the system after saving the changes made. 

 

Options available: Yes/No.   

  Discard Changes and Reset   

 

Restarts the sysetm without saving any changes.

 

Options available: Yes/No.   

  Save Changes    

 

Saves changes made in the BIOS setup.

 

Options available: Yes/No.   

  Discard Changes

 

Discards changes made and closes the BIOS setup.

 

Options available: Yes/No.   

Содержание G291-2G0












































































































































Отзывы:

Нет отзывов