Gicam WIN7, Руководство пользователя

Страница: 30 / 48

Pagina – page – Seite 28
Weighing parameter setting menu
With the instrument off, move jumper JP1 to the inside of the board (see installation manual) or hold down
the key while pressing the key.
Shutdown
instrument
PArAM SEr ConSt CALibr bAtt tESt
4 sec.
Set value Filt-
Set value StAb-
Set value Auto O
Set value 0 tr
Set value G CAl
Only with jumper
Set value G uSE
Only with jumper
Filt-
Digital weight filter factor from 0 to 4 (default 2).
StAb-
Weight stability factor 0 to 4 (default 2).
Aut 0
Autozero threshold in weight value (Default = 10% of range).
If autozero threshold = 0, autozero is not performed at power-up.
O tr
Automatic zero tracking factor (0 to 4). (Default = 2).
The zero tracking factor determines the tracking speed. The maximum resettable value
corresponds to 2 % of the range.
G CAl
Gravity acceleration of the calibration site.
Gravity acceleration data are available only in the fiscal version with the calibration jumper
closed. Set only the decimal digits (e.g., G=9.79584, set 79584). Gravity acceleration
values are automatically reset, when the weight calibration is changed. Entering the value 0
cancels the correction on the original calibration
G uSE
Gravity acceleration of the place of use.
Gravity acceleration data are available only in the fiscal version with the calibration jumper
closed. Set only the decimal digits (e.g., G=9.79584, set 79584). Gravity acceleration
values are automatically reset, when the weight calibration is changed. Entering the value 0
cancels the correction on the original calibration