User’s Guide
Ethernet Driver
G-1
Appendix G
Ethernet Software Configuration
On board Ethernet interface of the 486 All-in-One board supports all major
network operating systems. I/O address and interrupts are easily configured
via the RSET8019.EXE program. To execute the configuration, to view the
current configuration, or to run diagnostics, do the following:
1. Power on the 486 All-in-One board. Ensure that the RSET8019.EXE file
is located in the working drive.
2. At the prompt type RSET8019.EXE and press <Enter>. The Ethernet
configuration program will then be displayed.
3. This simple screen shows all the available options for the Ethernet
interface. Just highlight the option you wish to change by using the Up
and Down keys. To change a selected item, press <Enter>, and a
screen will appear with available options. Highlight your option and
press <Enter>. Each highlighted option has a help message guide
displayed at the bottom of the screen for additional information.
4. After you have made your selection and are certain with your choice,
press ESC. A prompt will appear asking if you want to save the
configuration. Press Y if you want to save.
The Ethernet Setup Menu also offers three very useful diagnostic functions.
They are:
1. Run EEPROM test
2. Run Diagnostics on Board
3. Run Diagnostics on Network
Each option has its own display screen which shows the format and result of
any diagnostic test undertaken.
Ethernet Driver Support
These drivers are designed to work in a workstation environment under
Windows NT, Win 95 or DOS operating system. You may install these
drivers for your application.
