User’s Guide
Display
5-1
Chapter 5
Display
The on-board VGA interface of the GT-460 supports traditional analog CRT
monitors and a wide range of popular LCD, EL, gas plasma flat panel
displays. It can drive CRT displays with resolutions up to 1024x768 in 256
colors. It is also capable of driving color panel displays with resolutions of
640x480 in 256K colors.
5.1 Drivers and Utilities
5.1.1 Microsoft Windows 3.1
The graphic installation program,SETUP.EXE, supports a simple installation
procedure of the display driver program. You may install these drivers either
through Windows or in DOS. To use Setup, follow the steps as below:
1.
Ensure that MS Windows 3.1 is up and running properly, using the
standard VGA driver. Exit from Windows.
2.
Place
the
Windows 3.1x display Driver Diskette
in drive A. Type
A:<ENTER>
to make it be the default drive. Type
SETUP <ENTER>
to
run the drive SETUP program. Press any key to get to the application
list. Using the arrow keys, select
Windows Version 3.1
and press
<ENTER>
key. Press <
ENTER>
key to select
All Resolutions
, then
press <
END>
to begin the installation. At this point, you will be asked for
the path to your Windows system directory (default C:\ WINDOWS).
When the installation is complete, press any key to continue. Press
<ESC>
key followed by
Y
to exit to
DOS
.
3.
Change to the directory where you installed Windows (default
C:\WINDOWS )
4.
Type
SETUP<ENTER>
to run the Windows Setup program. It will show
the current Windows configuration. Use the “up” arrow key to move to
the Display line and press <
ENTER>
. A list of display drivers will be
shown. Use the arrow keys to select one of the drivers starting with an
asterisk (*) and press
<ENTER>
.
5.
Follow the directions on the screen to complete the setup. In most
cases, you may press
<ENTER>
to accept the suggested option. When
Setup is done, it will return to
DOS
. Type
<WIN>
to start Windows with
the new display driver.
