Giantec GT-460 Скачать руководство пользователя страница 34

Страница: 34 / 77

User’s Guide

BIOS Setup

4-20

item

Options

Descriptions

A. Power

Management

1. Disable

Global Power Management will be

disabled.

2.User Define

Users can configure their own

power management.

3. Min Saving

Pre-defined timer values are used so

that all timers are in their MAX value.

4. Max Saving Pre-defined timer values are used so

that all timers are in MIN value.

B. PM Control

by APM

1. No

System BIOS will ignore APM when

power management is running the

system.

2. Yes

System BIOS will wait for APM prompt

before it enters any PM mode e.g.

DOZE, STANDBY or SUSPEND.

Note: If APM is installed, and if there is

a task running, even the timer is

time out, the APM will not prompt

the BIOS to put the system into

any power saving mode

Note:

−

if APM is not installed, this

option has no effect.

C. Video Off

Option

1. Always On

System BIOS will never turn off the

screen.

2.Suspend

−

Off

Screen off when system is in SUSPEN

mode.

3.Susp,Stby->

Off

Screen off when system is in STANDBY

or SUSPEND mode.

4.All Modes

−

Off

Screen off when system is in DOZE,

STANDBY or SUSPEND mode.
Note: The M/B markers are

recommended to fix this item

to (2) or (3) and hide it by using

MODBIN Utility.

D. Video Off

Method

1. Blank

Screen

The system BIOS will only blank off

the screen when it disables the video.

2. V/H SYNC

+Blank

In addition to (1), BIOS will also turn

off the V-SYNC & H-SYNC signals

form VGA cards to monitor.

3. DPMS

This function is enabled only for the

VGA card supporting DPMS.
Note: Green monitors detect the V/H

SYNC signals to turn off its

electron gun.

Содержание GT-460














































































Результаты поиска

Содержание GT-460

Отзывы:

Похожие инструкции для GT-460

Бренды по названию

Популярные бренды

Giantec GT-460, Руководство пользователя

Результаты поиска

Содержание GT-460

Отзывы:

Похожие инструкции для GT-460

Бренды по названию

Популярные бренды