EnergyPak Plus
INSTALLATION & USER MANUAL
7 / 8
11. BOTTLE CAGE ADAPTER
With the supplied bottle cage adapter, it is possible to place a bottle cage onto the baseplate, instead of the EnergyPak
Plus.
12. USB PORT
The EnergyPak Plus can also function as a powerbank to charge your device. Use the USB port in well ventilated areas
and dry conditions only. Always make sure the USB port cover is fully closed during riding with the EnergyPak Plus.
Mount a bottle cage onto the adapter.
Make sure the bottle cage bolts do not stick out of the bottom surface of the adapter.
HOW TO USE THE USB PORT:
1. Pull and lift the USB port cover to expose the USB port.
2. Connect your device with a compatible USB cable.
3. When finished, remove the device and cable from the EnergyPak Plus.
4. Close the USB port cover.
Slide the adapter down onto the base plate until it snaps in place.
To remove the adapter with bottle cage, pull in the opposite direction.
STEP 1
STEP 2
13. FREQUENTLY ASKED QUESTIONS
Q: Can I turn on EnergyPak Plus power in the middle of cycling?
A: Yes. You can connect and turn on EnergyPak Plus power any time, no need to turn off the E-bike.
Q: Can I charge my E-bike battery and EnergyPak Plus at the same time?
A: No. The Smart Charger can only connect to one EnergyPak at a time.
Q: Can I use EnergyPak Plus without the main battery?
A: No. The bike can be switched on, but the motor can’t draw power from EnergyPak Plus without the main battery present.
Q: How many times can I charge my EnergyPak Plus?
A: As many and often as necessary. However, all batteries degrade over time, and will eventually wear out.
The rate at which the battery capacity will degrade depends on various circumstances, like age, workload, temperature and
the number of (dis)charges.
Q: How does display show battery level?
A: The display will show the total level of both Energypaks combined.
Q: How does display show remaining range of the battery?
A: The display shows the remaining range of both EnergyPaks combined.