13
Automatic Door Operator
Manual
Steps Figures
Description
Step 7.
Use Allen Wrench to tighten the Blind Nut. This will
compress the screw so that it remains permanently
fixed in the hole. Repeat these steps on other Blind
Nuts. (Do not over tighten the Blind Nut.)
Blind Nuts Installation illustration
Step 8.
Blind Nuts installation completed.
Step 9.
Place the sliding rail template to the right position on
the door. See the figure presented for an out-swing
door (Right-Hand Open), more details shown in
P. 11
Step 10.
Mark for pilot holes.
(
Use the center pointer)
Step 11.
Drill three
ø
9.5mm pilot holes.
Figure 17.
