Automatic Door Operator
Manual
2
Construction Breakdown
Gianni Industries, Inc.
Address: No.13, Zhong Sing Road, Tu-Cheng City, Taipei, Taiwan 23678
E-mail: [email protected]
Website: www.gianni.com.tw
Herewith declares that AD425S Automatic Door Operator
for swing doors: (One way direction only.)
AD425S Automatic Door Operator can not be installed with other mechanism except electric door locks.
Conformity with other CE directives: Electromagnetic Compatibility Directive 2004/108/EC
（
EN61000-6-1
、
EN61000-6-3
、
EN61000-3-2
、
EN61000-3-3
）
/ Low Voltage Regulation 73/23/EEC
Product life: 2 years (Daily cycle 600 times)
Product should be operated under the recommended door weight. A reduction in performance is to be
expected when the access is made to operate at the maximum permissible weight.
Service class, product operation times and the number of consecutive cycles have been statistically analyzed
to determine under average operating conditions, and it does not represent for use under a special condition.
(See P. 7 Figure 1)
The characteristic performance of door operation may be affected by different independent variables like
friction, offset (balancing), environmental factors and so on. These factors may change the performance of the
door operator’s working life or parts. Furthermore, the assembly must be considered and enables infinite
durability and continuous operation.
Manufacturer's Declaration
Construction Name
1. Cover
2. Motor
3. Reducer
4. Square Couplings
5. Control Board
6. Rechargeable Battery
7. Power Switch
8. Operating Arm
9. Sliding Rail
10. Stopper Ball
11. Baseplate
12. Transformer
13. Encoder
14. Photocell
tery
1
10
11
12
9
8
4
5
6
7
3
2
