1
Automatic Door Operator
Manual
This instruction manual is intended solely for use by qualified professionals. All installations, electrical
connections and adjustments must follow the installation instructions.
Please read this manufacturer's instructions carefully before installing this unit. Incorrect installation may result
in severe personal injury and/or damage to property.
Packaging materials (plastic and polystyrene, etc) should be disposed of without causing environmental
damage and should be kept out of reach of children.
Do not install this unit in a chemical explosive environment or atmosphere to prevent a risk of explosion. The
location of this unit is important in achieving proper performance and normal operating life. This unit should be
installed in a safe operating condition
Make sure the construction‘s strength and stability are up to standard. Manufacturer will not be held responsible
for any damage resulting from incorrect use of this unit.
These safety devices (e.g. photocell and emergency stop) must follow the technical safety regulations and
current safety standards, including limiting of forces and speeds to ensure the door operator works very well at
all times.
The safety devices must protect any areas where the risk exits of being crushed, cut or gagged or where there
are any other risks generated by the motorized door or gate. Apply hazard areas notices required by applicable
regulations.
Each installation must clearly show the identification details of the motorized door/gate.
Make sure the voltage specified as correct for the device.
Must provide at least 10 seconds rest time between every restarting cycle to ensure adequate residual current
can be returned to power system.
Make sure to turn the power off before installing and checking this unit and to avoid the risk of fingers that are
in contact with the electronic components. External interconnection wiring should be performed wearing the
antistatic glove.
According to operating instructions, motorized door installer and the manufacturer
of the machinery have the same obligations:
The technical documents and the annex to the AD425S Automatic Door Operator
must be kept and placed at the disposal of competent national authorities for at
least 5 years from the manufacturing dates. CE attestation of conformity should
deliver it to the customers.
Should you have other queries, please refer to the www.gianni.com.tw to download
AD425S full details and other relevant documentations.
Do not push or pull the door with excessive force during proper operation.
（
Excessive force will damage the construction of the automatic door operator.
）
General Safety Precautions
Security Statement
Encoder
Photocell
