GHM DeltaOhm HD402 Series, Руководство по эксплуатации

Страница: 12 / 28

HD402…
- 12 -
V1.1
TAB. 4.3: measuring ranges for the analog output in the models HD402[A]T3
Dip switch number
6 2 3 4 5 4 5 4 5 4 5
OFF OFF ON OFF OFF ON ON ON
kPa mmHg PSI mbar
OFF
OFF ON 0…2.5 0…10 0…0.4 0…25
ON OFF 0…5 0…25 0…0.75 0…50
OFF OFF
0…10 0…50 0…1.5 0…100
ON ON
ON
OFF ON -2.5…+2.5 -10…+10 -0.4…+0.4 -25…+25
ON OFF -5…+5 -25…+25 -0.75…+0.75 -50…+50
OFF OFF
-10…+10 -50…+50 -1.5…+1.5 -100…+100
ON ON
TAB. 4.4: measuring ranges for the analog output in the models HD402[A]T4
Dip switch number
6 2 3 4 5 4 5 4 5 4 5
OFF OFF ON OFF OFF ON ON ON
kPa mmHg PSI mbar
OFF
OFF ON 0…25 0…100 0…4 0…250
ON OFF 0…50 0…250 0…7.5 0…500
OFF OFF
0…100 0…500 0…15 0…1000
ON ON
ON
OFF ON -25…+25 -100…+100 -4…+4 -250…+250
ON OFF -50…+50 -250…+250 -7.5…+7.5 -500…+500
OFF OFF
-100…+100 -500…+500 -15…+15 -1000…+1000
ON ON
TAB. 4.5: measuring ranges for the analog output in the models HD402[A]T5
Dip switch number
6 2 3 4 5 4 5 4 5 4 5
OFF OFF ON OFF OFF ON ON ON
kPa mmHg PSI mbar
OFF
OFF ON 0…50 0…250 0…10 0…500
ON OFF 0…100 0…500 0…15 0…1000
OFF OFF
0…200 0…1000 0…30 0…2000
ON ON
ON
OFF ON -50…+50 -250…+250 -10…+10 -500…+500
ON OFF -100…+100 -500…+500 -15…+15 -1000…+1000
OFF OFF
-200…+200 -1000…+1000 -30…+30 -2000…+2000
ON ON
Configuration via the serial port COM AUX:
The configuration set with the serial communication is used by the transmitter only if
the dip switch 1 is OFF.
In order to modify the settings, please proceed as follows:
•
Connect the serial COM AUX output of the transmitter to the RS232 port (via the