manualshive.com logo in svg

GHM DeltaOHM HD2010UC, Руководство по эксплуатации

Поделиться
Скачать
GHM DeltaOHM HD2010UC Скачать руководство пользователя страница 83

 

HD2010UC 

-   83   - 

V4.2

 

ORDERING CODES 

 
HD2010UC.Kit1:

 type 1 integrating sound level meter kit with 4MB memory 

The kit includes the HD2010UC class 1 integrating sound level meter, HD2010PNE2 pream-
plifier  preamplifier (or HD2010PNE2W with opt.  HD2010.OE), UC52/1  pre polarized con-
denser microphone ½”, HD2110USB cable (alternatively, on request, HD2110RS serial cable 
for RS232 connection), HDSAV windshield, Noise  Studio PC software  (basic version),  IEC 
61672 manufacturer conformity declaration, carrying case, instruction manual. 

 

 

HD2010UC.Kit2:

 type 2 integrating sound level meter kit with 4MB memory 

The kit includes the HD2010UC class 2 integrating sound level meter, HD2010PNE2 pream-
plifier preamplifier (or HD2010PNE2W with opt. HD2010.OE), UC52 pre polarized conden-
ser microphone ½”, HD2110USB cable (alternatively, on request, HD2110RS serial cable for 
RS232 connection),  HDSAV windshield, Noise  Studio  PC software  (basic version),  IEC 
61672 manufacturer conformity declaration, carrying case, instruction manual.

 

 

Options, accessories and software  

HD2010.O0 “Memory module”: 

4 MB memory expansion. It requires the HD2010.O2

 

“Advanced 

Data Logger” option. 

HD2010.O2  “Advanced Data Logger”: 

sound level profiles automatic recording, full statistic 

analysis, capture and analysis of sound events with trigger function, simultaneous data log-
ging of profiles, reports and events. “Navigator” program for reviewing stored data. 

HD2010.O1/4 “Microphone chain for high levels measurements” 

(up to 160dB): replaces 

HD2010PNE2  preamplifier and UC52/1  microphone with HD2010PNE4  preamplifier,  com-
plete with HDP079A02 microphone adapter, and MC24E ¼” microphone with 2 mV/Pa sen-
sitivity. 

Available only for the kit HD2010UC.Kit1

. 

HD2010.O1/4H  “Microphone chain for high levels measurements” 

(up to 180dB): replaces 

HD2010PNE2  preamplifier and UC52/1  microphone with HD2010PNE4H  preamplifier, 
complete with HDP079A02  microphone adapter,  and MC24EH  ¼” microphone with 0.25 
mV/Pa sensitivity.

 Available only for the kit HD2010UC.Kit1

. 

HD2010.OE “Microphone chain for outdoor measurements”

: replaces the standard 

HD2010PNE2 preamplifier with the heated version HD2010PNE2W, equipped with CTC de-
vice for electrical calibration and 5m integrated extension cable (10m  on request); includes 
the outdoor unit HD WME with windshield, rain shield and bird spikes. This option is availa-
ble only in combination with the standard microphone. 

HD2020

:

 

class 1, according to IEC60942:2003, acoustic calibrator with LCD display. Suitable for 

½”  and,  with  HD2020AD4  adapter  not  included, ¼”  standard microphones. Calibration fre-
quency 1000 Hz, levels 94 dB and 114 dB. ACCREDIA calibration certificate is included. 

HD2022

:

 

class  2,  according to IEC60942:2003,  acoustic calibrator. Suitable for ½”  and,  with 

HD2020AD4 adapter not included, ¼” standard microphones. Calibration frequency 1000 Hz, 
level 114 dB. ACCREDIA calibration certificate is included. 

HD2020AD4

: ½”- ¼” adapter for ¼” microphones. It can be used with HD2020 and HD2022 cali-

brators. 

CPA/5:

 10m extension cable for HD2010PNE2 preamplifier.

 

CPA/10:

 10m extension cable for HD2010PNE2 preamplifier. 

SWD10: 

stabilized power supply with Vin =100÷240Vac / Vout=12Vdc/1000mA.  

VTRAP: 

tripod, max. height 1550mm. 

HD2110/SA:

 support to fix the preamplifier to the tripod. 

Содержание DeltaOHM HD2010UC







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды