GHM Delta OHM HD50 Series, Руководство по эксплуатации

Страница: 13 / 54

HD50
- 13 -
V1.5
•
MEASURES panel
Selection of the quantities to be displayed cyclically on the data logger display. For
each quantity, a custom name can be defined. In the panel, the resolution and the
unit of measurement of each quantity are also indicated. The quantities available de-
pend on the data logger model type.
•
LOGGING panel
Setting of logging interval, measuring interval, logging status (active or not active),
memory management mode when it is full (cyclic overwriting or stop logging).
If the logging interval is greater than the measuring interval, the average of the
measurements acquired during the logging interval will be stored.
The “
Erase Memory
” button allows erasing the data in the data logger memory.
Select the quantities to be displayed cyclically on the display
Custom name
Select to define a custom name
Button to refresh the settings
Press “ Apply ” to send the changes to the data logger
Logging
interval
Measuring
interval
Press “ Apply ” to send the
changes to the data logger
Cyclic : cyclic overwriting of the memory
NO Cyclic : logging is stopped when the memory is full
Button to erase the memory
Button to refresh
the settings
Active
: logging is active
NO Active : logging is not active