background image

HOBO® Pendant® Event Data Logger (UA-003-64) Manual 

9831-I MAN-UA-003 

The HOBO Pendant Event/Temp Data Logger is a rugged, weatherproof event logger with a 10-
bit temperature sensor. It is ideal for use with tipping-bucket rain gauges, and can record tens 
of thousands of measurements and events. The logger uses a coupler and optical base station 
with USB interface for launching and data readout by a computer. 

Specifications 

External Event Input 

 

Event Sensor 

Two-wire interface suitable for measuring mechanical and electrical contact 
closures 

Maximum Input 
Frequency 

1 Hz (1 pulse per second) 

Lockout Time 

500 ms 

Minimum Pulse Width 

1 ms (hardware debounce) 

Input/Output Impedance 

100 k

Ω

 

Edge Detection 

Falling edge, contact closure, or Schmitt-trigger buffer 

Preferred Switch Type 

Normally open. For maximum battery life, the event input should be used 
with its preferred switch type. The logger will work with normally closed 
switches, but battery life will be compromised. 

Open Circuit Input 
Voltage 

Battery voltage; nominally 3.0 V 

Maximum Input Voltage 

Battery v 0.3 V 

User Connection 

24 AWG, 2 leads: white (+), black (-) 

Temperature Measurement 

 

Measurement Range 

-20° to 70°C (-4° to 158°F) 

Accuracy 

±0.53°C from 0° to 50°C (±0.95°F from 32° to 122°F), see Plot A. A solar 
radiation shield is required for accurate temperature measurements in 
sunlight. 

Resolution 

0.14°C at 25°C (0.25°F at 77°F), see Plot A 

Drift 

Less than 0.1°C/year (0.2°F/year) 

Response Time 

Airflow of 2 m/s (4.4 mph): 10 minutes, typical to 90% 

Logger 

 

Time Accuracy 

±1 minute per month at 25°C (77°F), see Plot B 

Operating Range 

-20° to 70°C (-4° to 158°F) 

Environmental Rating 

Tested to NEMA 6 and IP67; suitable for deployment outdoors 

Drop Specification 

1.5 m (5 ft) onto concrete 

NIST Traceable 
Certification 

Available for temperature only at additional charge; temperature range  
-20° to 70°C (-4° to 158°F) 

Battery 

CR-2032 3V lithium battery; 1 year typical use 

Memory 

64K bytes; see 

Data Storage

Materials 

Polypropylene case; stainless steel screws; Buna-N o-ring; PVC cable 
insulation 

Weight 

50 g (1.7 oz.) 

Dimensions 

71 x 33 x 23 mm (2.8 x 1.3 x 0.9 inches); 1.8 m (6 ft) cable 

 

The CE Marking identifies this product as complying with all relevant 
directives in the European Union (EU). 

 

 

 

HOBO Pendant Event  
Data Logger 

Model: UA-003-64 

Included Items: 

 

Tie wraps 

 

Adhesive mount 

Required Items: 

 

HOBOware 2.x or later (go to 
www.onsetcomp.com/ 
hoboware-free-download) 

 

USB cable 

 

Pendant Optic USB Base 
Station & Coupler (BASE-U-1) 

 

Optic USB Base Station 
(BASE-U-4) or HOBO 
Waterproof Shuttle  
(U-DTW-1) & Coupler 
(COUPLER2-A) 

 

 

Shop for Data Logging products online at:   

www.

DataLoggerStore

.ca   

1.800.561.8187

Содержание Pendant Event

Страница 1: ...0 to 50 C 0 95 F from 32 to 122 F see Plot A A solar radiation shield is required for accurate temperature measurements in sunlight Resolution 0 14 C at 25 C 0 25 F at 77 F see Plot A Drift Less than 0 1 C year 0 2 F year Response Time Airflow of 2 m s 4 4 mph 10 minutes typical to 90 Logger Time Accuracy 1 minute per month at 25 C 77 F see Plot B Operating Range 20 to 70 C 4 to 158 F Environmenta...

Страница 2: ...OBO Waterproof Shuttle briefly press the coupler lever to put the shuttle into base station mode 4 If the logger has never been connected to the computer before it may take a few seconds for the new hardware to be detected 5 Use the logger software to set up the alarms launch and read out the logger You can read out the logger or check its status while it continues to log stop it manually with the...

Страница 3: ...og battery data it is recommended that you disable that channel Like other U Series loggers this logger stores internal events that are unrelated to the external event inputs Internal events are stored when the coupler is attached or detached when the battery drops below approximately 2 7V when the battery rises above 2 8V when a host computer is connected and when the logger is stopped by a comma...

Страница 4: ...et and use the thumb and fingers on your other hand to slide the O ring to form a loop as shown in photo at right Use this loop to roll the O ring off the cap and over the grommet do not slide it over the circuit board 7 Inspect the O ring for cracks or cuts and replace it if any are detected the O ring is included in this logger s replacement parts kit 8 Using your fingers not cloth or paper spre...

Отзывы: