Bedienungsanleitung
As of 04/20/2010
Seite 14/16
4.5
Startup
Now the
Expansion Box
and the power supply can be reconnected again.
For any change the
Expansion Box
must be assigned to the ProfiLux again, so that all resources (sensors
and interfaces) can be detected. Furthermore the before assigned resources may be shifted. Therefore it is
important to check the assignments of the interfaces (particularly level sensors, pumps and valves for
water change, dosing pumps) and to correct it if necessary before reactivation.
5
Warranty/ liability
You have a 2-year warranty beginning from invoice date. This applies to material and manufacturing
defects.
We guarantee that the supplied products correspond to the specifications and that the products do not
have material resp. manufacturing defects. For the accuracy of the programming manual we do not take
over a guarantee. For damages of any type which result from an improper operation or from a not suited
surrounding of the aquarium computer or accessory we are not liable. Furthermore we do not take over
warranty for damages that are caused through a false connection. We assume no liability for direct
damages, indirect damages, consequential damages and third party damages as far as it is legally
permitted. We do not take over guarantee that our product package corresponds to the requirements of
the buyer. Our warranty expires if the delivered original product is damaged or modified.
6
Further information
6.1
Help and information
You will get from your specialist retailer. If you dispose of an Internet access, you can get tips and helpful
suggestions on our website www.aquariumcomputer.com. Please also note the links to several forums
there.
6.2
Firmware update
The firmware of our
Expansion Box
and ProfiLux aquarium computers is continuously further developed. If
you would like to use new functions or modules which are not yet supported by your current firmware,
you can program your aquarium computer with the newest firmware.
For this, there are several options:
You send your
Expansion Box
to your specialist retailer or to GHL and let it be newly programmed
(at cost price).
You do the update by yourself. Therefore you need the newest firmware and the PC program
ProfiLuxControl
, both can be downloaded free of charge from our website, as well as our USB
cable or serial connection cable. On the website also the instruction for the firmware update can
be found.
