GHL ProfiLux Expansion Box, Руководство пользователя

Страница: 12 / 16

Bedienungsanleitung
As of 04/20/2010 Seite 12/16
4 Hardware modules
4.1 General
The Expansion Box is modularly expandable. To be able to use additional sensors, powerbars, dimmable
lamps etc., the installation of up to 5 additional modules is possible.
Hint
In case of any change (add, remove or exchange) of module cards the Expansion Box
needs to be assigned again to the ProfiLux, so that the ProfiLux detects and stores the
changes. Thereby the assignment of the resources in the ProfiLux may change.
Therefore all assignments should be checked before reactivation.
To be able to use the modules, possibly a firmware update of the
Expansion Box or aquarium computer is
necessary. Have a look here also at the instructions which are delivered together with the module.
If you do not like to do the installation by yourself, we can do this for you for a low charge (possibly
together with a firmware-update).
Hint
In the last slot Modul 4 only analog measurement cards are supported at the
moment. Intelligent cards – like
PLM-2L4S , PLM-4L , PLM-Humidity-Temp , PLM-ADIN
or similar – can’t be operated there.
The firmware 1.02 supports the following cards
Analog measurement cards Double measurement cards Intelligent cards
PLM-pH PLM-pH-Temp PLM-2L4
PLM-Temp PLM-pH-Redox PLM-4L
PLM-Redox PLM-CondS-Redox PLM-Humidity-Temp
PLM-CondS PLM-CondF-Redox PLM-ADIN
PLM-CondF PLM-CondS-pH
PLM-Oxygen PLM-CondF-pH
The installation of a module requires greatest care! You have to pay attention that

First the aquarium computer is currentless (remove plug of power supply)

The electronics is not damaged through electrostatic charging (ground resp. discharge yourself;
earthed work environment)

You treat the housing with special care.