Bedienungsanleitung
As of 04/20/2010
Seite 9/16
3.5
The 1-10 V interfaces of the Expansion Box
The 1-10 V interfaces are available immediately after the assignment. Which of the interfaces are available
isn’t displayed. Therefore it is possible to know how the interfaces are numbered.
The numbering starts with the internal 1-10 V interfaces followed by the interfaces on the module cards at
the ProfiLux. Then the internal interfaces of the first
Expansion Box
found by the ProfiLux and the
interfaces on the module cards in the slots of the
Expansion Box
. Thereafter the interfaces of the second
Expansion Box
follow, and so on.
Example:
In case of a
ProfiLux 3
with a
PLM-4L
card and an
Expansion Box
with a
PLM-4L
the interfaces are assigned
in the following way:
As you can see here, the numbering begins with the internal 1-10 V interfaces of the ProfiLux. Then the
interfaces of the
PLM-4L
in the ProfiLux follows. Afterwards there are the internal 1-10 V interfaces of the
first found
Expansion Box
and then those of the
PLM-4L
installed in the
Expansion Box
. Here only the
interfaces from L1 to L16 are available, the others are free.
If a second
Expansion Box
would be connected, the interfaces of the second
Expansion Box
would follow.
