GHARiENi 601, Инструкция по эксплуатации

Страница: 18 / 82

17
1. To lift the 601 off the pallet, it must first be raised slightly so
that the upholstery of the legrest does not collide with the edge
of the pallet.
To do this, first connect it to a suitable connection socket.
Then press the corresponding button of the hand control and
keep it pressed. The hand control is located on the side of
a suspension device ( button T1 , see figure in chapter 11.1
HAND CONTROL
).
2.
You must also bring the backrest into an upright position before lifting the 601.
To do this, press the corresponding button on the hand control and keep it
pressed ( button T2 , see figure in chapter 11.1
HAND CONTROL
).
3.
Then pull the power supply plug !
4. Lift the 601 with one person at each corner of the base by hand
simultaneously . You need four people to do this.
NOTICE! You must always lift the 601 with one person simultaneously at
each corner of the base, otherwise you can seriously damage the bed.
RISK OF DAMAGE!
5.
You also need four persons to carry the 601 to the location you want.
6. Be sure to lift the 601 vertically off the pallet. Otherwise you will damage the
stands or castors.
7. Carry the 601 by the base only . Otherwise you can irreparably damage the 601.
8. If the floor is not completely level, you must ensure the stability of the 601 by
adjusting the four stands (B), (see figure).
❖
The treatment table is fully operational in just a few simple steps.
It can be flexibly adapted to any body size. Depending on the purpose, you can
set the desired position electrically in a very short time and then concentrate
entirely on your customers.